Always use a genuine Toyota fuse or equivalent.Never use a fuse of a higher amperage rating than that indicated, or use any.Failure to do so may cause damage to the vehicle, ■To prevent system breakdowns and vehicle fire Reinstall the cover, and then hook the rubber strip’s groove onto the cover. ■When reinstalling the cover (type C fuse box cover only) Parts or parts non designed for this vehicle may be unusable. Toyota recommends that you use genuine Toyota products designed for this vehicle.īecause certain bulbs are connected to circuits designed to prevent overload, non-genuine The fuses are designed to blow, protecting the wiring harness from damage. If the replaced fuse blows again, have the vehicle inspected by your Toyota dealer.If the lights do not turn on even after the fuse has been replaced, a bulb may.TheĪmperage rating can be found on the fuse box lid. Replace the blown fuse with a new fuse of an appropriate amperage rating. The pullout tool is located on the back of the type A fuse box cover. Only type A fuse can be removed using the pullout tool.
To unhook it from the cover, and then push the tabs in and lift the cover off.Īfter a system failure, see “Fuse layout and amperage ratings” (→P. Turn the engine switch to the “LOCK” position.
If this happens, check and replace the fuses as necessary. If any of the electrical components do not operate, a fuse may have blown. Your call matters to me, and I WILL respond. Call me today on 07548 973510 for a free, no obligation, quotation for your project. I want to provide you with a quality service that provides you with exactly what you need from an electrician in Bexleyheath and the surrounding areas.
Fuse box location manual#
Third generation (XP130 2010–present) / Toyota Yaris XP130 2010–2022 Owner's Manual / Maintenance and care / Do-it-yourself maintenance / Checking and replacing fuses I set up Mr Fuse Box in order to fill a gap in the domestic sector.
0 kommentar(er)
